Pitney Bowes DM50 Series Quick Install Manual page 3

2
Step
Position your system
Remove all packing material.
Choose a location for your system where it can remain plugged in and
turned ON at all times. Also, locate the system so that it can be plugged
into an internet enabled PC or an analogue telephone socket. This is
essential for refilling the machine with postage.
Installation requires contact with our Data Centre. The Data Centre is
open from 7am to 8pm Monday to Saturday including Bank Holidays.
Please do not attempt to install your system outside these times.
Position the weighing platform as shown.
3
Step
Choose a Connection Method
You have to connect to the Pitney Bowes Data Centre to add
postage funds, get software updates, and perform required Postal
Authority inspections.
You have the choice of connecting either via an internet enabled
PC using Pitney Bowes PC Meter Connect™ software or via an
analogue telephone line.
Connection using PC Meter Connect™ is much faster and incurs no
telephone call charges. Pitney Bowes therefore recommends this
method.
• To install PC Meter Connect™, go to...
europe.pb.com/PCMeterConnect/setup.exe
Choose the 'Run' option to install the software and be sure to
select 'English (UK)' as your installation language. You will need
administrator rights on your PC to install the software.
When the software is installed, continue with Step 5 of this guide.
• If you choose not to use the PC Meter Connect™ software,
continue with Step 4.
Please do not apply power to
your machine until Step 4.
Plug the platform's
connector into the
matching connector on
the back of the machine.
Tighten the connector
screws.
3