Configuring The Wireless Network - Kyocera TASKalfa 2552ci Operation Manual

Installing and Setting up the Machine > Network Setup

Configuring the Wireless Network

When the wireless network function is available or the Wireless Network Interface Kit (IB-51) is installed on the machine
and the connection settings are configured, it is possible to print or send in a wireless network (wireless LAN)
environment. The configuration methods are as follows:
Configuration Method
Configuring the Connection
from the Operation Panel
on This Machine
Setting the Connection by
Using the Wi-Fi Setup Tool
Setting the Connection by
Using the Setup Utility of
IB-51
Configuring Connections
on the Web Page
NOTE
When you want to switch to the network interface other than Wired (default), select the desired setting on "Primary
Network (Client)".
Primary Network (Client) (page 8-62)
Setting the Connection by Using the Wi-Fi Setup Tool
To send the Wi-Fi settings configured in the Wi-Fi Setup Tool to the machine, connect the computer or handheld device
with the machine locally. The connection methods are wired connection via LAN cable and wireless LAN connection (Wi-
Fi Direct).
NOTE
• Before using the Wi-Fi Setup Tool, connect your computer to this machine locally with wired LAN cable or Wi-Fi
Direct.
• To use Wi-Fi Direct, confirm that the Wi-Fi Direct is enabled (Wi-Fi Direct is set to [ON]) and Restart Network from
the operation panel, before your computer will be connected to this machine with Wi-Fi Direct.
• To use a wired LAN cable directly connected to the machine, the Auto-IP (Link-local) address will be assigned to the
machine and the computer. This machine applies Auto-IP as the default settings.
• Configure the settings on the operation panel if your computer supports WPS.
Wi-Fi Settings (page 8-51)
Wireless Network (page 8-61)
Wired Connection by Using LAN Cable
1
Use Quick Setup Wizard when configuring the
network in a wizard-style screen, without setting
indivisually in System menu.
Use Wi-Fi Settings or Wireless Network to configure
the network in details from System menu.
This is the tool included in the Product Library. You
can configure the connection according to the
instructions provided by the wizard.
This is the setup tool included in the CD of IB-51. You
can use it on both Windows and Mac OS.
The connection can be set from the Command
Center RX.
For the IB-51, the connection can be set on the
dedicated Web page.
Connect the machine with a computer
1
Connect the machine with a computer via LAN cable when the machine is powered on.
Description
2-32
Reference Page
Quick Setup Wizard (page 2-
42)
Wi-Fi Settings (page 8-51)
Wireless Network (page 8-61)
Setting the Connection by
Using the Wi-Fi Setup Tool
(page 2-32)
IB-51 Operation Guide
Command Center RX User
Guide
IB-51 Operation Guide