Kyocera TASKalfa 2552ci Operation Manual page 558

Troubleshooting > Troubleshooting
Error
Code
3201 Failed to send the e-mail.
Failed to send i-FAX.
0007 —
4201
4701
5101
5102
5103
5104
7101
7102
7103
720f
9181 —
Responding to Printing System Error
Error
Code
1020 Machine interface board
failure.
Call service.
1030 Failed to connect to the
Printing System.
Check the connection to the
Printing System.
> Printing System power
> Interface cable connection
1031 Failed to connect to the
Printing System.
Check the connection to the
Printing System.
> Interface cable connection
Message
Check the SMTP user authentication method of
the recipient.
Turn the power switch off and back on. If this
error occurs several times, make a note of the
displayed error code and contact your service
representative.
The scanned original exceeds the acceptable
number of pages of 999. Send the excess pages
separately.
Message
—
Is the power switch of Printing
System turned ON?
Is the power cable of Printing
System plugged?
Is the interface cable (DVI)
connected from the machine
to Printing System?
—
Corrective Actions
Checkpoints
10-47
Reference
Page
—
page 2-9
—
Corrective Actions
Printing System failure has
occurred. Make a note of the
error code displayed on the
touch panel. Call service.
Turn the power switch of
Printing System on.
Turn the power switch of the
machine off and check that
the power cable of Printing
System is correctly plugged.
After checking the power
cable, turn the power switch
of the machine on.
Check that the interface cable
is correctly connected.
Check that the interface cable
is correctly connected. If the
error exists, Printing System
failure has occurred. Make a
note of the error code
displayed on the touch panel.
Call service.