Replacing Staples (Folding Unit) - Kyocera TASKalfa 2552ci Operation Manual

Troubleshooting > Regular Maintenance

Replacing Staples (Folding Unit)

When the Staple Unit runs out of staples, the following messages will be displayed. The staple cartridge holder need to
be replenished with staples.
"Staple is empty."
NOTE
If the Staple Unit runs out of staples, contact your dealer or service representative.
1
2
3
Open the finisher front cover 1 and 2.
Remove the Staple Cartridge Holder (B) or (C).
Replace the staples.
2
1
1
2
1
1
10-15
C
B