Toner Container Replacement - Kyocera TASKalfa 2552ci Operation Manual

Hide thumbs Also See for TASKalfa 2552ci:
Table of Contents

Advertisement

Troubleshooting > Regular Maintenance

Toner Container Replacement

When toner is empty, the following message will be displayed.
"Toner [C][M][Y][K] are empty."
When toner runs low, the following message will be displayed. Make sure you have a new toner container available for
replacement.
"Toner is low. [C][M][Y][K] (Replace when empty.)"
NOTE
• For the toner container, always use a genuine toner container. Using a toner container that is not genuine may
cause image defects and product failure.
• The memory chip in the toner container of this product stores information necessary for improving customer
convenience, operation of the recycling system for used toner containers, and planning and development of new
products. The stored information does not include information that makes it possible to identify individuals, and is
only used anonymously for the above purposes.
CAUTION
Do not attempt to incinerate parts which contain toner. Dangerous sparks may cause burns.
Installation procedures of the toner container is same for every color. Here, we'll explain the procedures for the yellow
toner container, as an example.
1
2
Open the front cover.
The cover of the empty toner container is open.
NOTE
If you close the toner container cover before replacing the container, select [Open Toner
Container Cover].
Remove the toner container.
10-4

Advertisement

Table of Contents
loading

Table of Contents