Kyocera TASKalfa 2552ci Operation Manual page 399

Setup and Registration (System Menu) > System Menu
Item
File Format
Backgrnd Density (Copy)
BackgrndDens. (Send/
Store)
Prevent Bleed-thru (Copy)
Prevent Bleed (Send/Store)
Zoom
Border Erase Default
Border Erase to Back Page
Margin Default
Auto Image Rotation (Copy) Select the default Auto Image Rotation setting.
EcoPrint
Toner Save Level (EcoPrint) Select the default Toner Save Level (EcoPrint).
High Comp. PDF Image
Color TIFF Compression
Set the default type of the files.
Value: PDF, TIFF, JPEG, XPS, OpenXPS, High Comp. PDF
Set the default Backgrnd Density (Copy).
Value: Off, Auto, Manual (Darker 5)
Set the default Backgrnd Density (Send/Store).
Value: Off, Auto, Manual (Darker 5)
Set the default value for preventing bleed-through (Copy).
Value: Off, On
Set the default Prevent Bleed (Send/Store).
Value: Off, On
Select the enlarged/reduced default when paper size/sending size changed after the
originals set.
Value: 100%, Auto
Set the default width to be erased as a border.
Value
Metric: 0 to 50 mm (in 1 mm increments)
Inch: 0 to 2" (in 0.01" increments)
NOTE
To specify border erase widths around original, set the value in "Border". To specify
border erase widths in the middle of original, set the value in "Gutter".
Select the Border Erase Method for Back Page of a sheet.
Value: Same as Front Page, Do Not Erase
Set the default margin.
Value
Metric
Left/Right: -18 to 18 mm (in 1 mm increments)
Top/Bottom: -18 to 18 mm (in 1 mm increments)
Inch
Left/Right: -0.75 to 0.75" (in 0.01" increments)
Top/Bottom: -0.75 to 0.75" (in 0.01" increments)
Value: Off, On
Select the EcoPrint default.
Value: Off, On
Value: 1 (Low) to 5 (High)
NOTE
Raising the level reduces toner consumption, but image quality falls.
Select the default quality setting for high compressed PDF files.
Value: Compression Ratio Priority, Standard, Quality Priority
Select the compression method for sending the color documents in the TIFF format.
Value: TIFF V6, TTN2
8-19
Description