Kyocera TASKalfa 2552ci Operation Manual page 110

Installing and Setting up the Machine > Quick Setup Wizard
Network Setup
*1 This is displayed when the option of two FAX Kits has been installed.
*2 Inch version only.
*3 DRD reception mode is available for some countries.
*4 This setting does not appear in some regions.
*5 This function is displayed when the optional Job Separator (except 2552ci), Mailbox or 4,000-Sheet Finisher is
installed. When an Inner Finisher or a 1,000-Sheet Finisher is installed with the machine, this function is not
displayed.
*6 This function is displayed when [Weekly Timer] is set to [On].
*7 This function is displayed when [Network Selection] is set to [Wi-Fi].
*8 This function is displayed when [Network Selection] is set to [Wired Network].
*9 This function is displayed when [DHCP] is set to [Off].
NOTE
If the user authentication screen appears, enter your login user name and login password and select [Login].
The factory default login user name and login password are set as shown below.
2552ci
3252ci
4052ci
5052ci
6052ci
1
2
3
Configures network settings.
1. Network
Model Name
2500
3200
4000
5000
6000
Display the screen.
[System Menu/Counter] key > [Quick Setup Wizard]
Select a function.
Configure the settings.
Start the wizard. Follow the instructions on the screen to configure settings.
NOTE
If you experience difficulty configuring the settings, refer to the following:
Help Screen (page 2-25)
Network Selection
Wi-Fi
DHCP
IP Address
Subnet Mask
Default Gateway
Login User Name
2500
3200
4000
5000
6000
2-43
*7
*8
*9
*9
*9
Login Password