Kyocera TASKalfa 2552ci Operation Manual page 432

Setup and Registration (System Menu) > System Menu
Setup
Item
Connection Status
Quick Setup
Available Network
WEP Key Index
Push Button Method
PIN Code Method
(Device)
Custom Setup
Network Name (SSID)
Network
Authentication
Encryption
Check the wireless LAN status.
If the machine will connect to an access point that supports the automatic wireless
network setup, connection settings can be configured by Quick Setup.
Displays access points to which the machine can connect.
Select the key index of the access point.
Value: 0 to 3
If the access point supports the push button method, wireless settings can be
configured using the push button. This setting executes push button, and the
connection is started by pressing the push button on the access point.
NOTE
The push button method supports only the WPS.
Starts connection using the machine's PIN code. Enter the PIN code into the access
point. The PIN code of the machine is automatically generated.
The detailed settings for wireless LAN can be changed.
Set the SSID (Service Set Identifier) of the wireless LAN to which the machine
connects.
NOTE
Up to 32 characters can be entered.
Select network authentication type.
Value: Open, WPA2/WPA-PSK, WPA2-PSK, WPA2/WPA-EAP, WPA2-EAP
Select encryption method. The setting values vary depending on the Network
Authentication setting.
Network
Authentication
Open
WPA2/WPA-PSK
WPA2-PSK
WPA2/WPA-EAP
WPA2-EAP
8-52
Description
Encryption
Disable ―
WEP WEP Key: Up to 26 characters
WEP Key Index: 0 to 3
Data Encryption: AES, Auto
Preshared Key: Up to 64 characters
Data Encryption: AES
Preshared Key: Up to 64 characters
Data Encryption: AES, Auto
Data Encryption: AES