Kyocera TASKalfa 2552ci Operation Manual page 545

Troubleshooting > Troubleshooting
Message
Cannot punch at the
specified position.
Cannot punch this
paper.
Cannot staple at the
specified position.
Cannot staple this
*1
paper.
Cannot use ##### due
to a failure.
Checking the waste
toner box.
####
Check the document
processor.
Check the paper in the
multi purpose tray.
Check the side feeder.
Checkpoints
Have you selected a position
that cannot be punched?
Did you select a paper size/type
that cannot be punched?
Have you selected a position
that cannot be stapled?
Did you select a paper size/type
that cannot be stapled?
―
Is the waste toner box full?
Is the top cover of the document
processor open?
Is the document processor
open?
—
—
10-34
Corrective Actions
If the selected paper is not
changed and [Continue] is
selected, punch is released.
Select the available paper.
Select [Continue] to print.
If the selected paper is not
changed and [Continue] is
selected, punch is released.
Select the available paper.
Select [Continue] to print.
If the selected paper is not
changed and [Continue] is
selected, staple is released.
Select the available paper.
Select [Continue] to print.
If the selected paper is not
changed and [Continue] is
selected, staple is released.
Select the available paper.
Select [Continue] to print.
Call service.
Replace the toner container.
Reuse the black (K) toner
container as a waste toner box.
Handle the color toner
containers according to the
instructions supplied with them.
Select [Next]. The instructions
will be displayed.
NOTE
If you select [Open Toner
Container Cover], you can
open the Toner Container Cover
that you closed accidentally.
Close the document processor
cover.
Close the document processor.
The paper size is different. Set
selected size paper and select
[Continue].
The side feeder is not installed
correctly. Attach the side feeder.
Reference
Page
page 6-28
page 6-28
page 6-26
page 6-26
―
―
―
―
page 5-6
―