Single Band Display; Meter Type; Display Background Color - Kenwood TH-D74A User Manual

SINGLE BAND DISPLAY

You can changes the displayed information during single
band display.
Selecting the Information to Display
1 Access Menu No. 904
2 Select [Off], [GPS(Altitude)], [GPS(GS)], or [Date].
[Off]: The area around the band is blank.
[GPS(Altitude)]: The displayed information is as follows.
• Compass: Displays the direction to the target point
(your direction if the target point is off).
• Your latitude and longitude are displayed.
• alt: Displays your altitude. (The unit varies depending on
the Menu settings.)
• Relevant information is displayed until the target point is
reached. (This is not displayed when the target point is
off.)
• Target point name
• Angle
• Distance to the target point. (The unit varies
depending on the MENU settings.)
[GPS(GS)]: The displayed information is as follows.
• Compass: Displays the direction to the target point
(your direction if the target point is off).
• Your latitude and longitude are displayed.
• GS: Displays your grid square locator.
• Relevant information is displayed until the target point is
reached.
• Target point name
• Angle
• Displays your movement speed. (The unit varies
depending on the MENU settings.)
[Date]: Displays the date.
Note:
◆ When selecting [GPS(Altitude)] or [GPS(GS)], set the built-in
GPS to [ON].

METER TYPE

This function changes the design of the S/RF meter.
1 Access Menu No. 905.
2 Select [Type 1], [Type 2], or [Type 3].

DISPLAY BACKGROUND COLOR

You can set the background color to black or white.
1 Access Menu No. 906.
2 Select [Black] or [White].
12-8