Display - Kenwood TH-D74A User Manual

DISPLAY

Common icon Display Area
A Band Display Area
B Band Display Area
Various function indicator
Indicator
Performs as the S meter when receiving a
signal.
Displays the selected power level while
transmitting.
Indicates the transmission band.
Appears while using Economic low output
power.
Appears while using Low output power.
Appears while using Medium output power.
Appears while using High output power.
Appears while in FM mode.
Appears while in Narrow FM mode.
Appears while in Wide FM mode.
Appears while in AM mode.
Appears while in LSB mode.
Appears while in USB mode.
Appears while in CW mode.
Appears while in Digital Repeater mode.
Appears while in Digital Voice mode.
Appears when Voice Alert is set to "ON".
Appears when Voice Alert is set to "RX Only".
Appears when the Tone function is ON.
Appears when the CTCSS function is ON.
Appears when the DCS function is ON.
Appears when the Cross tone function is
"TONE/CTCSS".
Frequency Display
Description
Indicator
Appears when the Cross tone function is "DCS/
CTCSS".
Appears when the Cross tone function is
"TONE/DCS".
Appears when the Cross tone function is "DCS/
OFF".
Appears when the Shift function is set to plus.
Appears when the Shift function is set to minus.
Appears when the Shift function is set to -7.6
MHz. (TH-D74E only)
Appears when the Reverse function is ON.
Appears when the Attenuator function is ON.
Appears when the packet communication
speed in APRS mode is set to 1200 bps.
Appears when the packet communication
speed in APRS mode is set to 9600 bps.
Appears when the packet communication
speed in KISS mode is set to 1200 bps.
Appears when the packet communication
speed in KISS mode is set to 9600 bps.
Appears while in Stand-by (Packet mode).
Appears when the Beacon function is ON.
Appears when the Object function is ON.
Appears when the built-in GPS function is ON.
Blinks when the built-in GPS function is
positioning.
Appears when the built-in GPS function is in
Save mode.
Appears when the GPS Track Log function is
ON. Blinks when the built-in GPS function is
positioning.
Appears when the GPS Track Log function is
ON and the built-in GPS function is in Save
mode.
4-3
Description