SINGLE BAND DISPLAY
You can changes the displayed information during single band
display.
Selecting the Information to Display
1 Access Menu No. 904
2 Select [Off], [GPS(Altitude)], [GPS(GS)], [Data], or
[Demodulation Mode].
[Off]: The area around the band is blank.
[GPS(Altitude)]: The displayed information is as follows.
•
Compass: Displays the direction to the target point
(your direction if the target point is off).
•
Your latitude and longitude are displayed.
•
alt: Displays your altitude. (The unit varies depending
on the Menu settings.)
•
Relevant information is displayed until the target point
is reached. (This is not displayed when the target point
is off.)
•
Target point name
•
Angle
•
Distance to the target point. (The unit varies
depending on the MENU settings.)
[GPS(GS)]: The displayed information is as follows.
•
Compass: Displays the direction to the target point
(your direction if the target point is off).
•
Your latitude and longitude are displayed.
•
GS: Displays your grid square locator.
•
Relevant information is displayed until the target point
is reached.
•
Target point name
•
Angle
•
Displays your movement speed. (The unit varies
depending on the MENU settings.)
[Date]: Displays the date.
[Demodulation Mode]: Displays the demodulation mode.
Note:
¡ When selecting [GPS(Altitude)] or [GPS(GS)], set the built-in
GPS to [ON].
METER TYPE
This function changes the design of the S/RF meter.
1 Access Menu No. 905.
2 Select [Type 1], [Type 2], or [Type 3].
DISPLAY BACKGROUND COLOR
You can set the background color to black or white.
1 Access Menu No. 906.
2 Select [Black] or [White].
12-7