Rx Break-In Display; Callsign Announce - Kenwood TH-D74A User Manual

RX BREAK-IN DISPLAY

This function is to display information received from other
station in a Break-In screen. Received information is
displayed in a Break-In screen in the operation band.
RX Break-In Display Method
This function is to set the method to display a Break-In
screen (display a Break-In only when the received signal is
to your Callsign, or display a Break-In for all received signals,
etc.).
1 Access Menu No. 640.
2 Select [Off], [All], [Related to DSQ], or [My Station Only].
[Off]: Displays a one-line indication (D-STAR icon and
Callsign) for all received calls.
[All]: Displays a Break-In for all received signals.
[Related to DSQ]: Displays a Break-In when the Callsign
squelch or Code squelch matches.
[My Station Only]: Displays a Break-In to your station
only.
RX Break-In Display Size
This function is to select a display size when displaying
information received from the other party (Callsign, message,
etc.) as a Break-In display.
Single Band
1 Access Menu No. 641.
2 Select [Half Display] or [Entire Display].
Dual Band
1 Access Menu No. 642.
2 Select [Half Display] or [Entire Display].
RX Break-In Display Hold Time
This function is to select the hold time to display the Break-
In after RX ends. When the set time elapses, the Break-In
screen automatically disappears.
1 Access Menu No. 643.
2 Select [0], [3], [5], [10], [20], [30], [60] seconds or [Infinite].
Note:
◆ If 0 second is selected, the RX Break-In screen disappears
when RX ends.
◆ When there are multiple RX Break-In, only the most recent RX
Break-In is displayed.

CALLSIGN ANNOUNCE

This function is to announce the Callsign when a D-STAR
signal is received. It enables you to know the Callsign without
looking at the screen.
1 Access Menu No. 644.
2 Select [Off], [Kerchunk], [Except Kerchunk], [My Station
Only], or [All].
[Off]: Does not announce the Callsign.
[Kerchunk]: Announces the Callsign when the reception
is within 2 seconds.
[Except Kerchunk]: Announces the Callsign when the
reception is over 2 seconds.
[My Station Only]: Announces the Callsign for the
reception to your station only.
[All]: Announces the Callsign for all receptions.
Note:
◆ If the reception sound is not output because the digital squelch
does not match, the Callsign is not announced.
◆ Memo in the Callsign is not announced.
16-12