Formatting A Microsd Memory Card; How To Use A Microsd Memory Card; Loading Memory Data - Kenwood TH-D74A User Manual

Removing (Unmounting) a microSD Memory Card
When removing a microSD memory card, be sure to perform
the operation to safely remove (unmount) it.
Note:
◆ Removing a microSD memory card without unmounting it
correctly may damage it.
1 Access Menu No. 820.
The microSD memory card is unmounted. When
unmounting is completed, the completed confirmation
screen appears.
2 Press [A/B].
Unmounting completes and the frequency screen
reappears.
3 Remove the microSD memory card.
• When removing a microSD memory card, push until
you hear it unlock with a click and remove it.

FORMATTING A microSD MEMORY CARD

When using a new microSD memory card, format the
microSD memory card as described below. All the data in
the microSD memory card will be erased when the microSD
memory card is formatted.
1 Insert the microSD memory card into the transceiver.
2 Switch ON the power of the transceiver.
3 Access Menu No. 830.
The format confirmation screen appears.
4 Press [A/B].
Formatting begins. When formatting is completed, the
completed confirmation screen appears.
5 Press [A/B] again.
Formatting completes and the frequency screen
reappears.

HOW TO USE A microSD MEMORY CARD

Saving the Configuration Data
1 Access Menu No. 800.
Saving begins. When saving is completed, the data writing
completed screen appears.
2 Press [A/B].
The frequency screen reappears.
Saving the Configuration Data + Voice message
1 Access Menu No. 801.
Saving begins. When saving is completed, the data writing
completed screen appears.
2 Press [A/B].
The frequency screen reappears.
Note:
◆ This menu cannot be accessed when a voice message is not
recorded.
Saving the Repeater list Data
1 Access Menu No. 802.
Saving begins. When saving is completed, the data writing
completed screen appears.
2 Press [A/B].
The frequency screen reappears.
Saving the Callsign list Data
1 Access Menu No. 803.
Saving begins. When saving is completed, the data writing
completed screen appears.
2 Press [A/B].
The frequency screen reappears.
Note:
◆ This menu cannot be accessed when a microSD memory card
is not inserted in the transceiver
◆ Only up to 19 characters can be displayed for a file name in the
file list screen.

LOADING MEMORY DATA

Note:
◆ When the files are downloaded from our web site or created by
non-PC applications, the operations can not be guaranteed.
Import the Configuration Data
1 Access Menu No. 810.
The file type selection screen appears.
2 Select the data and press [ENT].
Importing begins.
3 Press [A/B] to restart the transceiver.
19-2
.