4. Automatic Power Off (APO)
This transceiver also provides an Automatic Power off
circuit. The circuit action is described below.
(default is off.)
4. To turn the APO function on/off, press the F key for
longer than 1 second and then press the MHz key .
The APO indicator lights.
A 5 second audio confirmation tone will sound after 2
hours 59 minutes if no signal has been received and
if you have not performed any operation.
1 minute after this alert signal the transceiver will
shut itself off.
2. When the APO operates and the transceiver is shut
off, the transceiver can be reactivated by turning the
POWER switch back on.
49