Memory Channel; Simplex & Repeater Or Odd-Split Memory Channel; Memory Channel List - Kenwood TH-D74A User Manual

8 MEMORY CHANNEL

In Memory channels, you can store frequencies and related
data that you often use. Then you need not reprogram
the data every time. You can quickly recall a programmed
channel by simple operation. A total of 1101 Memory
channels (1000 Memory channels, 100 Program scan
memory, and Priority scan memory) are available.
SIMPLEX & REPEATER OR ODD-SPLIT MEMORY
CHANNEL?
You can use each memory channel as a simplex & repeater
channel or as an odd-split channel. Store only one frequency
to use as a simplex & repeater channel or two separate
frequencies to use as an odd-split channel. Select either
application for each channel depending on the operations you
have in mind.
Simplex & repeater channels allow:
• Simplex frequency operation
• Repeater operation with a standard offset (if an offset
direction is stored)
Odd-split channels allow:
• Repeater operation with a non-standard offset
The data listed below can be stored in each Memory channel:
Parameter
Receive frequency
Transmit frequency
Receive frequency step size
Transmit frequency step size
Offset direction
Tone On/Off
Tone frequency
CTCSS On/Off
CTCSS frequency
DCS On/Off
DCS code
Shift
Reverse On/Off
Memory channel lockout * 2
Memory channel name
Demodulation mode
Cross tone
Fine mode
(Digital squelch) type *
(Digital squelch) digital code *
Destination Callsign *
Access repeater Callsign *
Destination repeater Callsign *
Note:
◆ Program scan memory and priority scan memory are excluded.
◆ *: Data for the digital mode (DV/DR)
Simplex &
Odd-split
Repeater
Yes
Yes
Yes
Yes
Yes
Yes
Yes No
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes No
Yes No
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes No
Yes No
Yes No
Yes No
Yes No

MEMORY CHANNEL LIST

The memory channel configurations can be displayed on the
Memory Channel List screen. In the Memory Channel List
screen, you can select a channel to store or to recall. You can
assign a name to a Memory Channel.
1 Press [MR] to switch to the memory mode.
2 Press [ENT].
Memory channel list appears. You can also access to the
memory channel list by Menu No. 200.
Memory channel type
Display
[0] to [999]
[L 0], [U 0] to [L49], [U49]
[Pri]
[A 1] to [A10]
[C]
3 Select the channel.
You can select the channel by inputting the channel
number from 0 to 999 by 12 keypad. When you select 1
or 2 digits channel, you can also select by inputting the
channel number and pressing [ENT].
4 Press [ENT].
The selected channel is set and return to the frequency
display.
Switching Memory Name Display
The memory channel list display can be switched to
frequency display or memory name.
1 Press [A/B].
Each press switches between frequency display and
memory name display.
8-1
Type
Memory channels
Program scan memory
Priority scan memory
Weather channels
(TH-D74A only)
CALL channels