Setting The Water Hardness Level - Miele DGC6500 Operating And Installtion Instructions

Accessories / Oven interior
 Remove all accessories from the
steam oven.
 Wash them by hand using hot water
and a soft clean sponge and a mild
solution of warm water and liquid
dish soap or in the dishwasher.
Risk of damage to the surfaces of
the universal tray and the wire oven
rack.
The universal tray and wire oven rack
are treated with PerfectClean and
must only be cleaned by hand.
See "Cleaning and care - Perfect-
Clean" for more information.
 Clean the universal tray and wire
oven rack with a solution of warm
water and liquid dish soap applied
with a soft sponge.
The interior of the steam oven has
been treated at the factory with a con-
ditioning agent.
 To remove this, clean the oven inte-
rior with warm water and liquid dish
soap and then dry thoroughly with a
soft cloth.
Before using for the first time
Setting the water hardness
level
The steam oven is factory set for
water. It must be adjusted local water
hardness to ensure trouble-free opera-
tion and to ensure that descaling is car-
ried out at the correct interval. The
harder the water, the more often it will
need to be descaled.
 Check the hardness of your local wa-
ter supply and adjust the water hard-
ness as necessary (see "Settings -
Water hardness").
Hard
27