Cleaning for the first time
Water container
Accessories / Oven interior
Setting the water hardness level
A functional test is carried out on the appliance at the
factory, making it possible that some water may drip from
the lines into the oven compartment during transport.
^ Remove any protective wrappings.
^ Take the water container out of the appliance and rinse it
by hand or in the dishwasher.
^ Remove all accessories.
^ Clean the cooking pans in the dishwasher or by hand.
The Universal tray and the wire oven rack are PerfectClean
coated and should only be cleaned by hand. Please refer to
the "PerfectClean" section.
^ Clean the universal tray and the wire oven rack with a clean
sponge, liquid dish soap and warm water.
^ Wipe the interior with a damp cloth to remove any dust or
bits of packaging that may be in the oven.
The Combi Steam Oven is factory set to the "Hard" water
hardness setting. To ensure that it is functioning properly and
descaled at the right time, you must set the local water
hardness. The harder the water, the more often the appliance
will require descaling.
^ Check which water hardness is set, and if necessary, set
the correct water hardness (see "Settings").
Before using for the first time
27