Maintenance; Important Instructions; Important Instructions For All Service Works; Cleaning - Soyer BMS-4 Akkumat Operating Instructions Manual

BMS-4 Akkumat

8 Maintenance

8.1

Important instructions

The stud welder is constructed in such a way that only a minimum of maintenance is required. It
should, however, be cleaned by a specialist at regular intervals depending on the environmental
conditions at the location of use.
WARNING
The service personnel are required to meet special requirements.
Our after-sales service has adequately trained personnel, suitable service equipment and
the means to carry out all necessary works.
8.2

Important instructions for all service works

DANGER
Always disconnect the mains cable from the mains supply before starting any repair work,
maintenance work or cleaning work.
Always disconnect the connecting plug from the mains supply socket before opening the
housing of the stud welding system. Only trained and appropriately qualified personnel
are allowed to carry out works at the electric mains supply and welding system.
NOTE
Only use original SOYER
8.3

Cleaning

Cleaning works are to be carried out every now and then depending on how soiled the stud welder is.
8.3.1

Detergents for cleaning the housing

Almost every detergent without corrosive or acidic substances is suitable for cleaning purposes.
However, please observe the manufacturer's specifications on the detergent you intend to use.
8.4

Replacement of components

Components may only be replaced by trained SOYER servicemen. Perfect function of your stud
welder can only be guaranteed when original SOYER spare parts are used.
CAUTION
Disconnect the mains cable from the mains supply before replacing any components.
Electric and electronic components may only be replaced by the SOYER
service or by trained and appropriately qualified personnel.
®
spare parts.
®
customer
25