Table of Contents
Advertisement
If an accident happens,
• switch off the welding device and disconnect it from the mains supply
• call a doctor.
3.10 Safety instructions for maintenance, inspection and assembly
Only carry out maintenance works when the welding equipment has been switched off
The user must ensure that all maintenance, inspection and assembly works are only
carried out by authorized and qualified technical personnel.
Generally, only work at the system when it has been switched off and after having
disconnected it from the mains supply. The safety instructions described in the
operating instructions have to be complied with.
Immediately after having completed your work, re-install and activate all safety and
protective devices.
3.11 Unauthorized retrofit and spare parts production
The system may only be retrofitted and modified after consultation with the
manufacturer. Original spare parts and accessories authorized by the manufacturer
guarantee safety. The use of other parts may result in the cancellation of warranty for
any consequences thus caused.
3.12 Inadmissible operating methods
Limit values
Working safety of the stud welding system supplied can only be guaranteed when the
system is used in accordance with its purpose. The limit values indicated in the
chapter "Technical data" must never be exceeded.
3.13 Stopping the stud welder
• Switch off the main switch (item 2, chapter 5.1) of the stud welder
• Disconnect the mains plug from the socket.
• Disconnect
- the control cable (item 9, chapter 5.1)
- the welding cable (item 10, chapter 5.1)
- the earth cables (item 12, chapter 5.1)
- gas supply (items 11+19, chapter 5.1) and compressed-air supply (items
20/21, chapter 5.1)
from the stud welder.
• Roll up the cables without buckling them.
!
Our GW-1 SOYER tool and gear wagon (optional equipment) is the optimum solution
for properly storing SOYER stud welders as well as welding guns, cables, studs,
retrofit kits etc.
• Make sure stud welder can not be used by unauthorized persons.
• Check welding cable and connections of the stud welder for damage such as
26
BMK-16 W
Advertisement
Table of Contents
