Table of Contents
Advertisement
5.3.3
Setting the stud distance
The PS-0DV stud welding gun allows stud distances of approximately 20 – 60 mm to be adjusted
depending on the respective requirements.
NOTE
Make sure that the stud distance is adjusted according to your requirements before
starting the welding process.
If required, a stud distance of 32, 40, 50, 52 or 57 mm can be permanently adjusted. The
appropriate spacers can be obtained from our company.
If a distance has already been permanently set, remove both spacers or replace by another
spacer, if need be.
6 Operation
22
The stud welding system must be switched off when setting the stud
distance.
Dismantle plate.
Bellows not pictured
Loosen 2 x M3 screws.
Bellows not pictured
Set desired stud distance between 20 and 60 mm.
Bellows not pictured
Fix plate to housing.
Bellows not pictured
BMS-4 Akkumat
Advertisement
Table of Contents
