Table of Contents
Advertisement
BMS-4 Akkumat
3 Description of stud welder
3.1
Description
The BMS-4 Akkumat stud welder allows two M3 studs to be simultaneously welded without earth
connection and is specifically used for attaching heating costs meters and suchlike. It is possible to
variably adjust stud distances. The BMS-4 Akkumat stud welder is suitable for mobile application and
enables you to carry out welding operations without using a mains cable. An external 12 V battery
charger required for charging the battery is included in delivery.
3.2
Capacitor discharge stud welding technology
The BMS-4 Akkumat SOYER stud welder runs according to the principle of capacitor discharge with
tip ignition as defined in DVS Leaflet 0903 (DVS = German Welding Society).
This system uses the sudden discharge of a capacitor battery to generate arc energy.
Stud tip touches workpiece
For further information, please refer to
IMPORTANT INFORMATION
Ensure that the surface is electroconductive.
Grind coated parts.
Ignited arc generates a fusion
zone on stud and workpiece
www.soyer.de
Stud is plunged into the
welding pool. Material solidifies
and stud is welded
15
Advertisement
Table of Contents
