Pontiac tempest 1968 Service Manual page 422

FOUR SPEED M U N C I E M A N U A L TRANSMISSION
7D-3
K N O B
(G.T.O.)
LEVER (TRANS. SHIFT C O N T R O L
- BUCKET SEAT)
G A G E PIN
(.250/.249 D I A . ) ^(f
LEVER ASSY (1ST. - 2ND
LEVER ASSY (3RD . - 4TH
TRANS EXTENSION
SUPPORT
SHIFT ROD
NUTS
T R U N I O N & PIN A S S Y /
(1ST. - 2 N D . )
CIRCLE Y
(1ST. - 2 N D . )
MUNCIE TRANS &
EXTENSION A S S ' Y
ROD (3RD. - 4TH .)
ROD (1ST. - 2 N D . )
SHIFT ROD
(3RD & 4TH)
F i g . 7 D - 2 Tempest Shift Controls
straight into bore of case extension with J 5154-A
(Fig. 7D-5).
CAUTION: Do not excessively force the seal
against the seat in the extension.
7. Install propeller shaft assembly by reversing
steps 1 and 2 above. Coat outside diameter of yoke
with gear lubricant before assembly.
TRANSMISSION SIDE COVER-
REMOVE AND DISASSEMBLE
It is not necessary to remove transmission from
vehicle for inspection or replacement of parts in
transmission side cover assembly, but the side
cover assembly itself must be removed from trans­
mission case.