Daily Use Of Speaker Combinations - Bang & Olufsen BeoVision 7 Manual

You can extend your television into
a surround sound system by adding
Bang & Olufsen loudspeakers and
up to two BeoLab subwoofers.
When you switch on one of the
sources, the television automatically
selects the appropriate speakers,
depending on what kind of sound
suits the source you are using.
The speaker combination is optimised if
you press the Optimise button on Beo5.
NOTE! If you have added only two front
speakers to the TV, you will only be able
to choose Mode 1–3.

Daily use of speaker combinations

Select speakers for movie sound
You can select the speaker combination
that suits the source you are using,
provided that the various speaker
modes are available in your television.
> Press to bring up the Scene display on
Beo5, then press Speaker to bring up the
Speaker display. (Beo4: Press LIST and use
the navigation button up or down to
bring up SPEAKER in the Beo4 display).
> Press Optimise if you want to optimise
the sound, or press Mode 1 – 5 to select
the speaker combination you want. (Beo4:
Press the centre button or 1 – 5). The
selected speakers cut in automatically.
> Press to remove the Speaker display
and return to the source you were using.
(Beo4: Press and hold BACK to remove
the SPEAKER from the Beo4 display).
35
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5