Connect Speakers - Bang & Olufsen BeoVision 4 Reference Book

14

Connect speakers

You can connect Bang & Olufsen speakers
and a BeoLab 2 subwoofer to BeoVision 4 via
the connection panel on the rear of
BeoSystem 2. The speakers must be Bang &
Olufsen Power Link speakers.
You can loop the signals through from
speaker to speaker (as described in the Guide
enclosed with your speakers), or you can
connect each individual speaker to a socket.
If necessary, longer cables and adaptors are
available from your Bang & Olufsen retailer.
Use the cables enclosed with the speakers to
make the following connections:
> Connect the two front speakers to the sockets
marked FRONT.
> Connect the two rear speakers to the sockets
marked REAR.
> Connect the centre speakers to the socket
marked CENTRE. Loop the signals through from
speaker to speaker when connecting the centre
speakers.
> Connect the subwoofer to the socket marked
SUBWOOFER.
Always remember to set the L – R – LINE switch on
both the front and rear sets of speakers to L or R
(left and right channel) to indicate their position in
each speaker set. Set the left front speaker to L,
the right rear speaker to R, and so on.
If you have only one set of speakers, connect
these to the sockets marked FRONT.
>> Loudspeaker setup – surround sound
L
L
Sound
1 Adjustment
2 Speaker type
3 Speaker distance
4 Speaker level
5 Speaker mode
6 Sound system
Front Rear
Beolab 1 Beolab 6000
R
SUBWOOFER
R
> Press MENU to bring up the main menu.
> Press 3 to bring up the Setup menu.
> Press 2 to bring up the Sound menu.
> Press 2 again to bring up the Speaker type
menu.
> Press p or m to reveal your speaker type
and n to move on to the next speaker set.
Choose None if no speakers are connected.
> If you have a BeoLab 2 subwoofer, press n to
Subwoofer
move the cursor to Subwoofer and press p to
Yes
change to Yes.
> Press GO to store your choices, or...
> ...press EXIT to leave the menu without storing.
If you have only one set of speakers, set 'Front' to
'None' – NOT to your speaker type!
For further information about the 'Speaker type'
menu, refer to page 38.
BeoSystem 2
FRONT REAR
CENTRE