Installing The Fuselage Servos - Seagull Models CHRISTEN HUSKY SEA180 Assembly Manual

CHRISTEN HUSKY
7) Slide the fuel tank into the fuselage.
Guide the lines from the tank through the
hole in the firewall.
8) Use plywood template to hold in place
the fuel tank with C/A glue to secure the
fuel tank inside the fuselage.
C
10 10
A
C/A glue
.
Fuel tank
C/A glue
B
Instruction Manual.
Fuel pick up tube.
9) Connect the lines from the tank to the
engine and muffler. The vent line will con-
.
nect to the muffler and the line from the
clunk to the carburetor.
Blow through one of the lines to
ensure the fuel lines have not become
kinked inside the fuel tank compart-
ment. Air should flow through easily.

INSTALLING THE FUSELAGE SERVOS.

Because the size of servos differ, you
may need to adjust the size of the precut
opening in the mount. The notch in the
sides of the mount allow the servo lead to
pass through.
1) Install the rubber grommets and brass
collets onto the throttle servo. Test fit the
servo into the aileron servo mount.
2) Secure the servos with the screws pro-
vided with your radio system.
Vent tube.
Fuel fill tube.
.