Setting With The Remote Controller; About On-Screen Menus; Operating With The Remote Controller; Main Menu - Sony SRG-360SHE Operating Instructions Manual

Setting with the Remote Controller

About On-Screen Menus

This section explains the conditions and system setup to
shoot referring to the menu items displayed on the screen
of the external monitor connected to the HDMI OUT/SDI
OUT connector.
When you operate pan, tilt, zoom, etc. using the remote
controller, see "Operation Using the Remote Controller"
on page 34.
This section explains how to read the on-screen menus
before starting menu operations.
For the overall menu configurations, see "Menu
Configuration" on page 69.
Note
You cannot perform pan/tilt operations while the menu is
displayed.
This menu is displayed on HDMI OUT/SDI OUT only.
Operating with the Remote
Controller
MENU
JOYSTICK
VALUE
LOCK
BLACK PAN-TILT ONE PUSH
POSITION GROUP
LIGHT RESET
KNOB
RESET
– +
R
PRESET GROUP POSITION
MODE
BRIGHT
1 2 3 4 5
SHIFT
9 10 11 12 13
– + GROUP
B
SELECT CAMERA
AUTO
FOCUS
AUTO 1 2 3 4 5
POWER
MANUAL
ONE PUSH
NEAR FAR AF
1
Press the MENU button of the remote controller and
hold it for about 1 second.
The main menu is displayed.
2
Select a setting menu with the joystick.
3
Decide the setting menu pressing the upper button of
the joystick.
1 2
Joystick
MENU
AWB
6 7 8
14 15 16
6 7
3
Upper
button

Main Menu

Press the MENU button on the remote control and hold it
for about 1 second to display the main menu.
a Selected item
Select a setting menu.
The currently selected item is shown in red.
The selected item shifts up or down when you tilt the
joy stick on the remote control up or down.
b Menu items
Select a setting menu with the joystick of the remote
controller and press the upper button. The selected
setting menu is displayed.
The menu display position changes when you tilt the
joy stick to the right or left in the main menu.

Setting Menu

The setting menu selected on the main menu is displayed.
a Setting menu
The name of the setting menu currently selected is
displayed here.
b Selected item
Select a setting item.
The currently selected item is shown in red.
The selected item shifts up or down when you tilt the
joy stick up or down.
c Setting items
The setting items for this setting menu are displayed.
d Set value
The currently set values are displayed.
To change a set value, incline the joystick of the
remote controller to the right or left.
For the default value of each setting item, see "Menu
Configuration" on page 69.
40