Picture Menu - Sony SRG-360SHE Operating Instructions Manual

PICTURE Menu

The PICTURE menu is used to set the items related to the
picture.
See "Picture" (page 56) or "Installation Tab" (page 52).
APERTURE (aperture compensation)
Select the aperture compensation level from among MIN,
1 to 14 and MAX.
HIGH RESOLUTION (high resolution mode)
You can set this mode to ON or OFF. When set to ON,
you can enjoy emphasised edge and high-resolution
images.
Note
When this is turned on, the image will have more noise
than when shooting with it turned off.
NOISE REDUCTION (noise reduction)
You can enjoy clearer images by removing unnecessary
noise (fixed pattern and randomised noise). You can
select 6 levels from OFF (MIN), 1 to 5 (MAX).
IMAGE STABILIZER (image stabilizer)
You can select this function according to the shooting
conditions.
OFF: The image stabilization feature becomes disabled.
ON: The image stabilization feature becomes enabled.
When set to ON, you can obtain steadier images if
vibration is present. This stabilizer is effective for
vibration frequencies around 10 Hz. This function utilizes
digital zoom; therefore, the angle of view and resolution
of images may be affected. However, image sensitivity is
retained.
Notes
• The image stabilizer function is not effective during
pan/tilt operations. It may take some time for the image
to stabilize after performing pan/tilt operations.
• If the image stabilizer function is already enabled, it
may take some time for the image to stabilize after
turning on the power of the camera.
• Depending on the installation conditions, the image
stabilizer may not be effective.
• When the image stabilizer function is enabled, the
subject appears closer.
• The image stabilizer may not be effective in an
installation environment where high frequency
vibration is present. In this case, set the image stabilizer
function to OFF.
26