Setting With The Remote Controller; About On-Screen Menus; Operating With The Remote Controller; Main Menu - Sony SRG-300SEC User Manual

Setting with the Remote
Controller

About On-Screen Menus

This section explains various settings, such as shooting
conditions and system setup of the camera, while
observing menus displayed on a connected external
monitor to the SDI output.
When you operate pan, tilt, zoom, etc. using the remote
controller, see "Operation Using the Remote Controller"
on page 47.
When you make the settings via a network, see "Setting
the Camera Via a Network" on page 19.
This section explains how to read the on-screen menus
before starting menu operations.
For the overall menu configurations, see "Menu
Configuration" on page 61.
Note
You cannot perform pan/tilt operations while the menu
is displayed.
Also, the menu display is available for SDI output only.
Operating with the Remote
Controller
JOYSTICK
VALUE LOCK
BLACK
POSITION GROUP
LIGHT
KNOB
RESET
– +
R
PRESET GROUP
MODE
BRIGHT
1 2 3
SHIFT
9 10 11
– + GROUP
B
SELECT
AUTO
FOCUS
AUTO 1 2 3
POWER
MANUAL
ONE PUSH
NEAR FAR AF
1
Press the MENU button of the remote controller
and hold it for about 1 second.
The main menu is displayed.
2
Select a setting menu with the joystick.
3
Decide the setting menu pressing the upper button
of the joystick.
52
About On-Screen Menus
1 2
MENU Joystick
PAN-TILT ONE PUSH
MENU
RESET AWB
POSITION
4 5 6 7 8
12 13 14 15 16
CAMERA
4 5 6 7
3
Upper
button

Main Menu

Press the MENU button of the remote controller and
hold it for about 1 second. The main menu is displayed.
1 Selected item
Select a setting menu.
The selected item is shown by the cursor. Move the
cursor up or down by inclining the joystick of the
remote controller up or down.
2 Menu items
Select a setting menu with the joystick of the
remote controller and press the upper button. The
selected setting menu is displayed.

Setting Menu

The setting menu selected on the main menu is
displayed.
1 Setting menu
The name of the setting menu currently selected is
displayed here.
2 Selected item
Select a setting item.
The selected item is shown by the cursor. Move the
cursor up or down by inclining the joystick of the
remote controller up or down.
3 Setting items
The setting items for this setting menu are
displayed.