Executing Log Dump; Setting Pc Remote Disp; Setting All Disp - Sony MCC-3000MT Service Manual

Item 7: Diagnosis between Image Processor and Display Blocks
Diagnosis between Image processor and Display blocks analyzes the following contents.
ID Diagnosis Description
0x80 Video signal line test
When an error is detected, it indicates a possible failure in the chip or the signal line between chips.
Item 8 to 13: Diagnosis between Display and Media Blocks
Note
Media block is not installed in this unit.
Do not execute Item 13 from Item 8.
3-5-4.

Executing Log Dump

In this unit, this menu cannot be selected.
3-5-5.

Setting PC Remote Disp

When operating this unit from a remote location via RS-232C, turn this On to display "REMOTE"on the screen (output)
and turn this Off to hide it.
Note
The factor setting is On.
3-5-6.

Setting All Disp

Turn this On to display all the information (including warning and caution) on the screen (output) and turn this Off to
hide it.
Note
The factor setting is On.
MCC-3000MT
Error Value
-1: Test pattern checking failure
Type 1/2 Note
1, 2 Conducts a test from
camera signal process-
or IC to base band pro-
cessing IC. Monitor
output images will be
distorted during the
test.
3-12