White Balance Menu - Sony SRG-360SHE Operating Instructions Manual

Hide thumbs Also See for SRG-360SHE:
Table of Contents

Advertisement

WDR (VIEW-DR): When MODE (exposure mode) is
set to FULL AUTO, the camera distinguishes light
and dark areas in the same scene, adjusts the
brightness for dark areas, and also controls the blown
out highlights.
You can select the wide dynamic range mode from
among OFF, LOW, MID and HIGH.
Notes
• You can set the wide dynamic range mode when WDR
(VIEW-DR) is set to FULL AUTO only.
• When changing WDR (VIEW-DR), a change in screen
luminance occurs for a moment.
• When the change of exposure is big, the screen may
stop for a moment.
• The audio will be muted for approximately 1 second
when WDR (VIEW-DR) switches.
GAIN LIMIT: Select the upper limit of the gain rise in
FULL AUTO, SHUTTER PRI and IRIS PRI modes.
Select from among 9, 12, 15, 18, 21, 24, 27, 30, 33,
36, 39, 43 dB.
EX-COMP (exposure compensation)
When MODE is set to one of FULL AUTO, SHUTTER
PRI or IRIS PRI, set this item to ON to enable exposure
compensation. When you set EX-COMP to ON, LEVEL
appears and you can select the exposure compensation
level from among the following:
–7, –6, –5, –4, –3, –2, –1, 0, 1, 2, 3, 4, 5, 6, 7
If you set the level to 0, exposure compensation will be
disabled. Level 7 is the brightest and –7 is the darkest
compensation value.
When EX-COMP is set to OFF, exposure compensation
does not function.
SLOW SHUTTER
When you set the mode to ON, the camera automatically
uses slow shutter speed for exposure as the illumination
of the object to be shot decreases. This mode is only
available when AE mode is set to FULL AUTO.

WHITE BALANCE Menu

The WHITE BALANCE menu is used to select the white
balance mode.
This can be set via the Web browser.
See "White balance" (page 55).
MODE (white balance mode)
Select the white balance mode from among the following:
AUTO, IN DOOR, OUT DOOR, ONE PUSH, ATW
(Auto Tracing White Balance), MANUAL.
When you select MANUAL, R.GAIN (R gain), B.GAIN
(B gain) will be displayed. These can be adjusted within
the range between 0 and 255.
When you select the ONE PUSH mode
Perform the following while the white balance menu is
displayed.
1
Zoom in on a white subject in the center of the screen.
2
Press the HOME button of the supplied infrared
remote commander.
The one-push white balance adjustment is activated.
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents