Video Codec Tab - Sony SRG-360SHE Operating Instructions Manual

Picture
You can also set from the remote controller.
See "PICTURE Menu" on page 43.
High resolution mode
Select On/Off of the high resolution mode. When set to
On, you can enjoy emphasised edge and high-resolution
images.
Noise reduction
You can enjoy clearer images by removing unnecessary
noise (fixed pattern and randomized noise).
You can select Off (MIN) or 5 levels from 1 to 5 (MAX)
for noise reduction.
Aperture
Set the sharpness. Select high values to make the image
edges sharper, lower values to make the image edges
smoother.
You can select from 0 (MIN), 1 to 14, and 15 (MAX).

Video codec Tab

Use this tab to set the items for the video codec.
Image 1, Image 2 and Image 3
Up to three image codec modes can be set. Configure the
following setting for each image mode.
Notes
• The frame rate and image size that can be selected may
change, depending on the setting of the SDI video
format.
• Video 2 and Video 3 are turned off when power is
supplied via PoE+. No output is present.
Image codec
Choose H.264 or Off. Video 1 cannot be turned off.
Notes
The selectable image size, frame rate, and image quality
for Image 2 and Image 3 may be limited, depending on the
setting of codec type, image size, and frame rate for
Image 1.
If you set Image 2 or 3 to other than OFF, the bitrate
cannot be set to a value over 8000kbps.
The following symptoms may occur depending on the
combination of the image size, frame rate and bit rate for
Image 1, 2 and 3.
In this case, adjust the value in each parameter to be low.
• The image delays more than usual.
• The frame is skipped when playing an image.
• The voice is broken.
• The response of the camera to commands delays.
• The response of the camera to operation from the
remote controller delays.
• The moving speed of the Viewer and camera settings
will be slow.
Image size
You can select the size of images sent from the camera.
Notes
• Some parts of the screen may not be displayed
depending on the image size.
• If you use Images 1, 2, and 3, do not use Plug-in Free
Viewer.
Frame rate
Set the frame rate of the image.
"fps" is a unit indicating the number of frames transmitted
per second.
I-picture interval
Set the I-picture insertion interval in seconds.
H264 Profile
Set the profile setting for H.264 video codec to high,
main or baseline. The video compression efficiency is
high, main and baseline in sequence. The specified
profile may not be available depending on the program
you use. Select the profile which is suitable for your
program.
Bit rate compression mode
Select CBR or VBR.
If you want to keep the bit rate fixed, select CBR. If you
want to keep the image quality fixed, select VBR.
Note
The frame rate or bit rate that is actually transmitted may
be different from the set values depending on image size,
scene, network environment.
56