Streaming Menu; Streaming Tab - Sony SRG-360SHE Operating Instructions Manual

Add
Save the current pan, tilt and zoom positions as a new
preset. You can also store the camera settings in the preset
positions from 1 to 16. For the setting items that can be
stored, see "Initial value and preset" on page 71.
Remove
Delete the selected preset items and return the stored
settings to the factory settings. For the setting items stored
in each preset setting, see "Initial value and preset" on
page 71.
Rename
Change the name of a selected preset.
Thumbnail
Check this checkbox to registers a thumbnail.
Select a radio button to determine whether to register the
current camera image as a thumbnail or to register with a
specified image.
To specify an image, click Choose File.
Note
A thumbnail cannot be registered with the operation using
the remote controller. When switching the Eflip function
On/Off in the Installation tab of System menu, all preset
settings are deleted.

Streaming Menu

When you click Streaming
Streaming menu appears.
Use this menu to set the items for the transmission by
unicast or multicast.
The Streaming menu consists of the Streaming tab.

Streaming Tab

Unicast streaming
Specify the transmission port numbers of the H.264 video
data and audio data to be used when Unicast is selected
from the Connection drop-down list in the Other panel
on the live viewer.
Note
Specify different numbers for the video port number and
the audio port number.
RTSP video port number 1, 2, 3
Specify the H.264 video transmission port number used
for RTSP unicast streaming. The default setting is 51000,
53000 or 55000. Specify an even number from 1024 to
65534. Two port numbers (the number specified here and
an odd number with 1 added to the specified number) are
actually used for video data communication and control.
When performing simultaneous multi-transmission, a
different port number will be used for every transmission,
based on the port number specified here.
The settings for Image 1, Image 2 and Image 3 apply to
RTSP video port number 1, 2 and 3 respectively.
RTSP audio port number
Specify the audio transmission port number used for
RTSP unicast streaming. The default setting is 57000.
Specify an even number from 1024 to 65534. Two port
numbers (the number specified here and an odd number
with 1 added to the specified number) are actually used
for audio data communication and control. When
performing simultaneous multi-transmission, a different
65
in the Administrator menu, the