Presetting Feature - Sony SRG-360SHE Operating Instructions Manual

Presetting Feature

Up to 6 combinations of settings (6 positions) including
camera position, zooming, focusing, and backlighting,
can be preset.
For details of the camera settings to be preset, see "Initial
value and preset" (page 71).
1
Press the PAN-TILT RESET button to reset the pan/
tilt position.
2
Adjust the position, zooming, focusing and
backlighting of the camera (pages 30 and 31).
3
While holding down the PRESET button, press any of
the POSITION buttons, 1 to 6, in which you want to
store the settings.
Recalling the stored settings
Press any of the POSITION buttons, 1 to 6, in which you
have stored the settings.
Cancelling the preset memory
While holding down the RESET button, press the
POSITION button from which you want to cancel the
settings.
Press a POSITION
button.
While holding
down this button
Press a POSITION
button.
While holding
down this button
Notes
• When the power is turned on, the camera starts with the
settings stored in POSITION 1.
• If you want to retain the previous pan and tilt positions,
etc. before the power is turned off and turned on again,
store those positions in POSITION 1.
• When you are storing or cancelling the settings in one
POSITION, you cannot call up, store or cancel the
settings in another POSITION.
• You can register, call, or delete the preset even while
the menu is being displayed. However, you cannot
change the position with the pan/tilt operation.
• If you turn the PAN/TILT LIMIT from OFF to ON, the
stored positions will be cleared.
Perform PAN/TILT LIMIT first, then preset.
• Please note that if you flip the image, the set position
will be cleared.
32