Operating A Camera Using The Remote Controller; Operating Multiple Cameras Using Multiple Remote Controllers; Pan/Tilt And Zoom Operation; Panning And Tilting - Sony SRG-360SHE Operating Instructions Manual

Operating a Camera
Using the Remote
Controller
When the camera and the remote controller are connected
with RS-422, only one camera can be connected to one
remote controller.
When this camera is connected with RS-422, Camera
Address 1 is automatically assigned.
Operating Multiple
Cameras Using Multiple
Remote Controllers
When using the camera and the remote controller with the
IP connection, up to 112 cameras and 5 remote controllers
can be operated.
For details on how to assign camera addresses, refer to the
Operating Instructions supplied with the remote
controller.
Pan/Tilt and Zoom
Operation

Panning and Tilting

PAN-TILT RESET
JOYSTICK
VALUE LOCK
GROUP
POSITION
KNOB
RESET
– +
R
GROUP
PRESET
MODE
BRIGHT
1 2
SHIFT
9 10
– + GROUP
B
SELECT
AUTO
FOCUS AUTO 1 2
POWER
MANUAL
ONE PUSH
AF
NEAR FAR
1
Press the CAMERA button corresponding to the
camera you want to operate.
2
Pan or tilt the camera using the joystick.
While checking the picture on the screen, incline the
joystick in the desired direction.
The panning/tilting speed changes according to the
angle at which you incline the joystick.
Release the joystick to stop panning/tilting.
To face the camera back to the front
Press the upper button on the joystick for 1 or 2 seconds.
Press for 1 or 2 seconds.
If you accidentally move the camera with
your hand
Press the PAN-TILT RESET button to perform the pan/
tilt reset action.
35
BLACK PAN-TILT ONE PUSH
MENU
LIGHT RESET AWB
POSITION
3 4 5 6 7 8
11 12 13 14 15 16
CAMERA
3 4 5 6 7
1 2