Controlling Via The Preset Position Panel; Controlling Using The Monitor Screen - Sony SRG-360SHE Operating Instructions Manual

Controlling via the preset position
panel
The preset position registered in the memory is displayed
on the preset position panel.
When selecting a preset position name from the preset
position panel, the camera will move to the preset
position.
Register the preset position using the Preset position tab
of the PTZF control menu (page 64).
Controlling using the monitor
screen
There are two operations for pan/tilt/zoom on the image:
Area zoom mode and PTZ control bar, where you click on
the control bar.
• Area zoom mode
By clicking an image, the camera moves to the direction
where the clicked point will be the center of the image.
The Area zoom will move the camera in the direction
that displays the area selected by the operator and
zooms in at the same time. The operator can choose a
part of the image to view and zoom in by surrounding
the area with a frame by dragging the mouse. The zoom
operation using the mouse wheel is available.
Panning and tilting by clicking the screen
(Area zoom mode)
Click on the monitor image, and the camera moves so that
the clicked portion is positioned at the center of the
image.
Panning, tilting and zooming by
specifying the area (Area zoom mode)
Click and hold the left button of the mouse on the monitor
image, and drag the mouse diagonally to draw a red frame
around the portion you want to enlarge. The camera
moves so that framed portion is positioned at the center of
the display and is zoomed in.
Note
When the specified area is zoomed in, the center may be
shifted or some portion of the image may appear out of
the monitor image section. In this case, click the point you
want to move to the center or click the arrow button on the
camera control panel.
50