Storing the Camera
Settings in Memory
– Presetting Feature
Up to six combinations of settings (six positions)
including camera position, zooming, focusing, and
backlighting, can be preset.
Note
The camera can store up to sixteen combinations of
settings (sixteen positions) in the memory, but the
supplied Remote Commander supports preset of six
positions only (POSITION 1 to 6). Use the RM-BR300
Remote Control Unit (not supplied) to store the settings
in POSITION 7 to 16.
For details of the camera settings to be preset, see
“Presetting Items” on page 70.
2
3
POSITION 1-6
RESET
1
3
PRESET
2
1
Press the PAN-TILT RESET button to reset the pan/
tilt position.
2
Adjust the position, zooming, focusing and
backlighting of the camera (pages 39 to 41).
3
While holding down the PRESET button, press any
of the POSITION buttons, 1 to 6, in which you want
to store the settings.
DATA SCREEN
BACK LIGHT
STD
REV
1
2
3
Press a POSITION
4
5
6
button.
PRESET
RESET
While holding down
POSITION
The message “PRESET No.xx” (selected
POSITION number) is output from the component
or RGB output connector and is displayed for about
2 seconds.
Storing the Camera Settings in Memory – Presetting Feature