Shooting With Back Lighting; Storing The Camera Settings In Memory - Presetting Feature - Sony BRC-Z330 Operating Instructions Manual

Shooting with Back Lighting

When you shoot a subject with a light source behind it,
the subject becomes dark. In such a case, press the
BACK LIGHT button.
To cancel the function, press the BACK LIGHT button
again.
FOCUS
AUTO MANUAL
FAR NEAR
DATA SCREEN BACK LIGHT
Subject appears brighter.
STD REV
1 2 3
Note
The BACK LIGHT function is not effective if MODE is
set to MANUAL in the EXPOSURE menu of the
camera.
Storing the Camera
Settings in Memory
– Presetting Feature
Up to six combinations of settings (six positions)
including camera position, zooming, focusing, and
backlighting, can be preset.
Note
The camera can store up to sixteen combinations of
settings (sixteen positions) in the memory, but the
supplied Remote Commander supports preset of six
positions only (POSITION 1 to 6). Use the RM-BR300
Remote Control Unit (not supplied) to store the settings
in POSITION 7 to 16.
For details of the camera settings to be preset, see
"Presetting Items" on page 77.
3
PRESET
2
1
Press the PAN-TILT RESET button to reset the pan/
tilt position.
2
Adjust the position, zooming, focusing and
backlighting of the camera (pages 43 to 44).
3
While holding down the PRESET button, press any
of the POSITION buttons, 1 to 6, in which you want
to store the settings.
DATA SCREEN
STD
1
4
PRESET
While holding down
POSITION
The message "PRESET No.xx" (selected
POSITION number) is displayed for about 2
seconds.
Storing the Camera Settings in Memory – Presetting Feature
2
3
POSITION 1-6
RESET
1
BACK LIGHT
REV
2 3
Press a POSITION
5 6
button.
RESET
45