Configuration - Pepperl+Fuchs KFD2-HLC-Ex1.D Series Manual

HART Loop Converter KFD2-HLC-Ex1.D(.**)
Installation
3.5

Configuration

Caution!
EN
Fault in the plant
Changing the device data changes the device function.
Before entering new device data, make sure the plant is not endangered by changing the
device data.
Configuring the Device
Configure the device using the buttons on the front side. Use the , , ESC, and OK
buttons for navigation. The following chapters contain more detailed information about the
menus.
The navigation principle is shown using the following example:
The menu items from the lowest menu level are outlined in bold.
22 - EN
OK →
Iout1 Assignment
← ESC
▼
Characteristic
← ESC
▼
Start Value
← ESC
▼
End Value
← ESC
▼
Fault Current
← ESC
Lowest menu level
▲
OK →
4 - 20 NE43
← ESC
▲
▲
▲