Pepperl+Fuchs KFD2-HLC-Ex1.D Series Manual page 31

HART Loop Converter KFD2-HLC-Ex1.D(.**)
Installation
Changing the Custom Tag of HART Variables
1. Select the HART variable for which you would like to change the custom tag.
2. Press the OK button.
3. Select the Custom Tag menu.
The device displays:
if a value has not been defined: the insert mark and the symbol 
If a value is defined: the insert mark on the first character, the following character, and
the symbol 
4. To select one of eight possible positions for the insert mark before the symbol ,
press the  or  button.
5. Confirm your selection with OK.
The insert mark flashes.
6. To select a character, press the  or  button.
7. Confirm your entry with OK.
8. Repeat steps 4 and 7, until all characters have been entered. You can also define
spaces.
9. To select the symbol  , press the  or  button.
10. Confirm your entry with OK.
The new value for Custom Tag has been stored.
Canceling the Value Input for HART Variables
You can cancel the value entry at any time.
Press the ESC button.
EN
EN - 29