Pepperl+Fuchs KFD2-HLC-Ex1.D Series Manual page 42

HART Loop Converter KFD2-HLC-Ex1.D(.**)
Installation
EN
Selecting an Assignment
The values of the HART variables selected here (PV, SV, TV, QV) are monitored using a
relay contact output. The number of available variables depends on the HART field device.
When disabled is selected, the relay remains constant in a de-energized state.
1.
2.
Defining Switching Characteristics
Selecting the switching characteristics defines the switching direction and the direction of
operation. See applications.
1.
2.
3.
4.
40 - EN
Select the desired HART variable using the  or  buttons.
Confirm your selection with OK.
Select the switching direction min or max with the  or  buttons.
Confirm your selection with OK.
Select the direction of operation passive or active with the  or  buttons.
Confirm your selection with OK.
OK →
Mode
← ESC
▼ ▲
OK →
Restart Inhibit
← ESC
▼ ▲
OK →
Delay
← ESC
passive
▼ ▲
active
On
▼ ▲
OFF
0 s ... 250 s