HART Loop Converter KFD2-HLC-Ex1.D(.**)
Installation
Activating Password Protection
To protect parameterization from unauthorized changes, you can enable password
EN
protection. Information about password protection see chapter 3.5.2.
1.
2.
3.
4.
5.
Resetting the Device to Factory Settings
1.
2.
Displaying the Software Version
Use the or buttons to display the version.
46 - EN
Use the or buttons to select the desired setting.
To enable password protection, select On Password.
Confirm your selection with OK.
To disable password protection, select Off Password.
Confirm your selection with OK.
Use the or buttons to select On Reset.
On Reset flashes.
Confirm your selection with OK.
The device is reset to factory settings. All entries you have defined in
parameterization mode will be lost.
The software version of the device software is displayed.