Frequently Asked Questions - D-Link DVX-1000 User Manual

21 Frequently asked questions

1. What is the username and password for access to the configuration
web pages and CLI?
The default administrator user extension is 'ippbx' and the password is
'ippbx'. We recommend changing these default values for security
reasons.
2. Why does DVX-1000 automatically switch to manual mode for time
configuration?
If you change the time or date manually using the CLI, DVX-1000 will
assume that you want to switch to manual time configuration, since,
NTP time cannot be changed. If you wish to continue using NTP time,
you will have to set the time configuration back to NTP using the
configuration pages.
3. Why does DVX-1000 automatically start using NTP server mode for
time configuration?
If the NTP server addresses are modified using the CLI, DVX-1000 will
apply the changes and switch automatically to NTP time. If you wish
to continue using manually configured time, you will have to set the
time configuration back to 'Manual' using the configuration pages.
4. Does DVX-1000 support daylight savings time?
DVX-1000
configuration is set to NTP and the correct time zone is selected.
5. I installed the wrong SSL certificate now I cannot log into the
administration web pages, how do I revert to the default certificate?
You can use the 'restorecert' command from the CLI to restore the
default certificate. Please refer the relevant section '
Command:
'.
6. Why doesn't DVX-1000 allow me to add users to Hunt/User group?
Hunt/User groups can have a maximum of 20 users per group. If you
have exceeded this number, further addition of users will fail.
7. Why doesn't DVX-1000 allow me to add a user to multiple Hunt/User
groups?
Any user can be a member of at most 5 groups. If you try to add a
user to more than 5 groups the request will be declined.
8. Why can't I add a registration manually?
The user you are trying to add a registration for might not be
configured yet. You can add registrations only for users who have
already been added to the call server following the procedure described
Adding a new user
in '
adding registration is through a SIP compliant endpoint.
9. Why can't I add more users to DVX-100?
DVX-1000 comes pre configured with a max number of 5 users. If you
want to add more than 5 users; a separate license has to be
purchased.
10. Why doesn't a feature work even after I have enabled it from the web?
D-Link Confidential
supports daylight savings
'. Please note that the recommended method for
70
DVX-1000 User Manual
time provided the
Restore Certificate
time