Table of Contents
Advertisement
on the LAN side of the router. Once a virtual server is configured, any packet sent
to the WAN IP and forwarded port of the router will be forwarded to the local IP
and port specified in the virtual server configuration. The virtual server
configuration required for each of the DVX's is as below.
DVX1 - IP:Port 61.95.197.113:5061 should be forwarded to IP:Port 10.0.0.10:5061
DVX2 - IP:Port 61.95.197.113:5062 should be forwarded to IP:Port 10.0.0.20:5062
DVX3 - IP:Port 61.95.197.114:5063 should be forwarded to IP:Port 192.168.50.30:5063
DVX4 - IP:Port 61.95.197.114:5064 should be forwarded to IP:Port 192.168.50.40:5064
The DVX's are connected in a mesh configuration. This configuration ensures that
any extension on the mesh can call any other extension on the mesh by signaling
through a maximum of two DVX's. The mesh is formed by configuring the DVX's
to register with each other in the following order.
The steps for configuring the DVXs to support this scenario are given below.
Please refer to 'Configuring Gateways' (Section 4.4) and 'Configuring Routes'
(Section 5.5) for more information about configuring gateways and routes.
D-Link Confidential
1.
Register DVX1 to DVX3 with user id 1133
2.
Register DVX1 to DVX4 with user id 1144
3.
Register DVX2 to DVX1 with user id 2211
4.
Register DVX2 to DVX4 with user id 2244
5.
Register DVX3 to DVX2 with user id 3322
6.
Register DVX4 to DVX3 with user id 4433
50
DVX-1000 User Manual
Advertisement
Table of Contents
