Table of Contents
Advertisement
•
Cross-Connect to other DVX-1000
The following advanced features are available through licensing
•
Auto Attendant
•
Customizable greetings
•
Interactive Voice Response (IVR)
•
Follow-Me Call Forwarding
•
Forward all calls
•
Forward calls when busy
•
Forward calls when no answer
•
Do Not Disturb—forward all calls to voicemail
•
Voicemail
•
Voicemail notification via email
•
Conference server
•
Call Park Retrieve
The license for the advanced features/additional users can be purchased. Please
contact D-Link customer support for more information. After purchasing the
license, the license code can by applied to DVX-1000 either by copy-pasting the
license code or by uploading the file containing the license code.
Administrator can view all the successfully applied license codes along with its
details from the License->History page.
10 Provisioning
The provisioning server is used to configure compatible devices to interoperate
with DVX. The Administrator needs to add the MAC address of the device which is
to be provisioned. This is used for initial authentication and to send the sip
credentials to the device. Addition of a new device or deletion of an existing one
can be done through Provisioning->DeviceList page of DVX web interface.
User has to provide the MAC address of the device and the sip users that are to
be used with the device. These sip users should have been created earlier
through CallServer->Users->Add users page. Provisioning server supplies an
Authentication key (a 48 hex bytes) to the device on the first communication.
This authentication key along with the sip credentials and MAC address can be
seen on the Provision->DeviceList->view ports page for each device. The
authentication key can be cleared by clicking the 'Clear Key' button. The sip user
list can be edited by clicking the 'edit' button.
The configuration file that has to be sent to each of these devices has to be
uploaded to DVX through the web interface. These files are identified by Vendor
id and Model no. Administrator has the option to add a new configuration file or
delete a configuration file from the 'Provisioning->Configuration file' page.
11 Software Upgrade
It is possible to remotely upgrade the DVX-1000 software. This is done by
accessing the web link software upgrade from the home page of the DVX-1000
web interface. The software to be upgraded will be sent to the administrator in
the form of a zipped tar file DVX_v1.0.0.tgz.The following steps are to be followed
to upgrade the software.
D-Link Confidential
DVX-1000 User Manual
35
Advertisement
Table of Contents
