Table of Contents
Advertisement
Route can be deleted from a RouteGroup. Deletion of a RouteGroup is possible
only if it is not being used by any user.
The following are the route configuration options.
RouteGroupName
Duration Parameters
Route Name
DestinationType
Destination Id
Priority
Min Digits
Max Digits
No of Mask Digits
Dialed Digits
Prefix
4.6
Configuring Groups
The Group configuration information can be viewed by clicking Call Server-
>Groups. Groups can be of two types
•
UserGroup
•
Hunt Group
The user group is specifically used for determining user privileges during Call
Pickup. A particular user can pick up calls for him on another extension only if
that extension belongs to the same user group as him. A new Group can be
added by clicking Add New. A unique Id needs to be given to each Group. Group
Type distinguishes between a user group and a hunt group. The mode field is
relevant only to a hunt group. A hunt group can be configured in on of four
modes (First Only /Sequential /Parallel/Distributed). Members in a user group are
added when the user is actually added to the call server. Hunt Group members
can be added/edited/deleted by clicking the edit button in the 'View members'
page.
A group can be deleted only if it does not contain any user.
Note: Each Group (User/Hunt Group) can have a maximum of 20 users.
Beyond this a new user group has to be created to add more users. Also,
a user can belong to a maximum of 5 user/hunt groups.
5 Using the feature manager
The following section gives an overview of what the call server features are, how
they are to be activated and what their functionality actually is.
D-Link Confidential
Specify a new unique RouteGroup Name (Max 20
Char)
Specify the time for which this Route is valid. All time
parameters are mandatory.
Specify a new unique Route Name (Max 20 Char)
Type
of
the
Route
Destination.
LOCAL/PSTN/INET.
Indicates the Gateway Id corresponding to this route.
For LOCAL destination type Gateway Id need not be
specified, hence disabled.
Indicates priority of this route in its RouteGroup. The
value can be in the range of 1 to 25. If the new route
is added with an existing priority, the priority of the
old Route will be incremented to next value.
Indicates the minimum dial digits for this route
Indicates the maximum dial digits for this route.
Indicates the number of Dial Digits to be masked.
Dialed strings to be matched to select this route entry.
A dialed string of '*' matches any string of 0 or more
elements.
Prefix to be added to the number after masking.
23
DVX-1000 User Manual
It
can
be
Advertisement
Table of Contents
