User Configuration - D-Link DVX-1000 User Manual

STUN configuration
NAT Configuration
Other Configuration
4.2

User Configuration

A user needs to be configured before registration. The current user configuration
information can be obtained by clicking, Call Server->Users.
D-Link Confidential
expiry time.
The Maximum expiry time has to be
between 3600 and 86400 secs.
STUN Server The domain name or IP address of the
Domain name STUN server that should be used for
STUN resolution
STUN Server port The port on which the STUN server
accepts STUN requests
NAT support type STUN
Virtual server
Static NAT
Virtual Server IP IP of the Public Interface of the Router
or firewall from which port forwarding
is done to the local IP of DVX
Virtual Server port The port number which is forwarded to
DVX.
Static NAT IP The Public IP of the device on which
static (one to one) NAT is configured
Session Refresh The interval at which a gateway call
Timeout will be refreshed if there is no other
signaling activity. Any SIP activity on
this call leg will reset this timer. This
can be specified anywhere between 60
and 600 secs.
Default No Answer The time for which a call will be tried,
Timeout before it is assumed that the user is
not answering. This can be specified
anywhere between 10 and 50 secs.
18
DVX-1000 User Manual
STUN requests will
be sent to the
server configured
above and the
publicly routable IP
address obtained
dynamically
The Virtual Server
IP address and port
specified below will
be used to form SIP
messages. This
should be used
when a port on the
router or firewall is
forwarded back to
the DVX.
The public IP
specified will be
used in all
messages and one
to one mapping of
the public IP to the
local IP of the
device will be
assumed. This
should be used
when there is only
one device behind
the NAT device and
one to one mapping
is specified between
the public IP of the
NAT device and the
local IP address of
the DVX.