Table of Contents
Advertisement
Reliability', 'Minimize cost'
Note: It is strongly recommended that the default values for QoS be used unless
there is a specific requirement for a different QoS.
14 Factory Reset
DVX-1000 configuration parameters can be set to factory default values through
web or 'RESET' switch on DVX-1000. The following section describes the
functionality of the factory reset feature.
14.1
Factory Reset procedure
14.1.1 Factory Reset through web
Click in the link 'Factory Reset' in the menu. Click on the 'Apply button' and select
'yes'. The factory reset will start now.
14.1.2 Factory Reset using 'RESET' switch.
Press and release the RESET button on the panel of the board. Please take care
not to keep the button pressed for more than 2 seconds.
14.2
Factory Reset Functionality
Factory Reset has to be enabled with caution. This is because several
settings/configuration options that have been modified will be restored to the
factory defaults. When factory reset is enabled from the web interface of the
DVX-1000 the following changes will be effected to the system:
•
Licensing and feature information: All the licensed features that exist
at the time of factory reset will be retained across the reset.
•
Users and User Groups: Users and the user groups that have been
configured will remain as they are (i.e. after factory reset, the
administrator does not have to add the users and their groups
again).Though the users are still configured, all the features that have
been enabled for the users are now disabled. The users now have no
features activated and the feature password is reset back to the user
extension of the user.
•
Route Groups: All the configured users will be moved to the default route
group (LocalRouteGroup) with only a single local route group configured.
Any special routes that need to be added for the users will have to be
reconfigured after factory reset.
•
Hunt Groups: All hunt groups that have been configured will be deleted
after factory reset. These have to be added again after reset.
•
Registrations: All current active registrations will be retained in the DVX
database. This is so that the configured users are not forced to re-register
every time the DVX-1000 goes back to the factory default settings.
•
Gateways: All the PSTN and INET gateways configured will be deleted on
factory reset. These have to be reconfigured after reset.
•
Call Detail Records and alarms: All the call detail records and alarms
will be deleted on factory reset.
•
Default Authentication: Default Authentication after factory reset is set
to "False".
•
Auto Attendant, Voice mail and Operator Number: The current values
of auto attendant, voice mail and operator number will be retained across
a factory reset.
•
Voice mails: All voice mail messages will be deleted during a factory
reset.
D-Link Confidential
DVX-1000 User Manual
37
Advertisement
Table of Contents
