Table of Contents
Advertisement
KEYBOARD TEST
When you press a key on the system keyboard, the name of the key – for ex-
ample, "INFO" – is displayed; the key number is displayed for function keys.
End of test:
If no key is pressed for 5 seconds, the test is aborted and you go back to the
menu.
DISPLAY TEST
The following test images are displayed one after the other:
1. Display light
2. Display dark
3. Character set
SUPPLEMENTARY
Authorization:
FUNCTION TEST
The status of the authorization input is displayed (0 = inactive, 1 = active),
until some key or other is pressed.
Watchdog:
The internal watchdog hardware initiates RESET of the processor, and the
OP executes a cold start.
SPC TEST
A check determines whether the ASIC chip responsible for the SINEC L2-DP
and MPI connection is present. If this is not the case, an appropriate error
message is issued.
Manual OP5, OP15
( ) J31069-D0840-U001-A2-7618
Test and Monitoring Functions
19-3
Hide quick links:
Advertisement
Table of Contents
