Siemens OP5 Equipment Manual page 100

Mechanical Installation
Front panel
Figure 14-1 Positions for Screw Type Hooks on the OP5 and OP15
To attach them, you must put in the screw type clamps
the OP
towards the front panel (14-2).
Screw type clamps
Figure 14-2 Tighten the OP to the Front Panel
14-2
Front panel
Rear of
OP5
and screw the threaded spindles
Threaded spindles
Rear of
device
Rear of
OP15
in the housing of
at the rear with an Allen key
Allen key
Manual OP5, OP15
( ) J31069-D0840-U001-A2-7618